The Tag won't connect
Charge the Tag and Tag Base.
Turn both off and on (hold each power button for about 1 second).
Check the Tag's switch is set to GPS tracking.
Keep the Tag Base on the Pod mount, next to the phone, with Bluetooth on.
Start a Ride or Lesson in Pivo Arena 1.23 or later.
The screen won't turn green
Move outdoors, away from roofs and trees.
Wait for the Tag light to turn solid white (orange means it's still finding the sky).
Stand about 10 m (33 ft) from the Pod, centered on the screen.
Click the Tag once when the screen turns green.
The Pod stopped following me
Check the Tag light — orange means move into open sky; it picks back up once white.
Red or off means the Tag needs charging.
Stay within 100 m (330 ft) of the Pod.
Make sure the Tag is still clipped on.
The Pod is following the wrong horse
Confirm setup finished — the screen turned green and the Tag light is white.
Make sure each rider is wearing the Tag paired with their own Tag Base (sets ship as pairs).
Each rider needs their own Pod and Tag set.
The Tag fell off
Stop and pick it up — the Pod follows the Tag wherever it is.
Reattach it with the clip or strap, facing up.
Check it's secure before continuing.
The Tag is lost If the Tag and Tag Base are still connected, you can make the Tag beep from Pivo Arena to help find it. Pivo Tag only connects within 100 m (330 ft) of its Base and doesn't work as a general locator.
Nothing got recorded Recording only starts once setup is complete — click the Tag once when the screen turns green. Keep your phone charged and on the Pod; if it dies, recording stops.
Still stuck after two fixes? Contact support@pivo.ai with your order number, phone and Pivo Arena version, Pod model, what color the Tag and Tag Base lights are showing, and (for a possible defect) a short video of the issue.